Book a Consultation
Dry ice cleaning the engine bay of a red Ferrari in the studio, vapour rolling over the bodywork

Dry Ice Cleaning in Surrey

No water. No chemicals. No compromise.

Dry ice cleaning removes contamination that nothing else can touch, without a single drop of water, without chemicals, and without any risk to the surfaces being cleaned. Paul was the first detailer in the UK to offer it, in 2014.

First in the UK
2014
Water used
0
Chemical residue left
0

Paul Dalton was the first detailer in the United Kingdom to use dry ice cleaning, in 2014. What is now becoming more widely known in the industry, Paul has been offering for over a decade.

What it actually is

The science behind dry ice cleaning.

A hopper full of dry ice pellets
Dry ice pellets, solid CO2 at -78.5°C

Dry ice cleaning uses solid carbon dioxide pellets, frozen CO2 at -78.5°C, accelerated at high speed through a specialised gun onto the surface being cleaned. Three things happen simultaneously, and together they achieve results nothing else can replicate.

First, kinetic energy. The pellets impact the surface at high velocity, breaking the bond between the contaminant and the surface beneath it.

Second, thermal shock. At -78.5°C, the pellets cause the contaminant to contract rapidly and become brittle, fracturing it away from the substrate.

Third, sublimation. Dry ice converts directly from solid to gas: it never becomes liquid. This means no moisture, no water damage to electronics or wiring, and zero residue. The contaminant is blasted away and the CO2 simply disappears into the air.

The result is a level of cleanliness that steam, pressure washing and chemical cleaning cannot achieve, in places those methods cannot safely reach.

Why it works

Three mechanisms. One result nothing else achieves.

Before dry ice cleaning: a gearbox under a car, its casing caked in brown grime and rust
Before dry ice cleaning: a transmission casing, coated in old oil and brown grime
Before dry ice cleaning: a BMW underbody panel, slick with oil and road grime
Before
After dry ice cleaning: the same gearbox under a car, the bare aluminium casing clean and bright
After dry ice cleaning: the same transmission casing, the cast aluminium clean down to its texture
After dry ice cleaning: the same BMW underbody panel, the panel clean, with its bolts and exhaust shield visible
After
A gearbox, under the carA transmission casing, up closeA BMW underbody panel
  1. I

    Kinetic Energy

    Impact at high velocity

    Dry ice pellets travelling at high speed physically dislodge contamination (grease, oil, road grime, underbody deposits), breaking its bond with the surface beneath without any abrasion or chemical action.

  2. II

    Thermal Shock

    -78.5°C on contact

    The extreme cold causes contaminants to contract rapidly, becoming brittle and fracturing away from the substrate. It reaches into crevices and gaps that brushes and cloths cannot access, removing deposits that have been there for years.

  3. III

    Sublimation

    Solid to gas, no liquid

    Dry ice skips the liquid phase entirely, converting directly from solid to gas. No moisture is introduced to the surface. No chemical residue is left behind. Wiring, electronics, sensors and delicate surfaces are completely safe.

Experience that matters

Over a decade ahead of the industry.

Paul Dalton dry ice cleaning the engine bay of a red Ferrari, the vapour rolling off
Paul Dalton, dry ice cleaning a Ferrari engine bay

When Paul started using dry ice cleaning in 2014, it was virtually unknown in automotive detailing in the UK. There was no manual to follow, no training course to take. The learning came from doing, on some of the most valuable cars in private ownership.

A decade of experience working with this technology on engine bays, interiors, underbodies, restoration projects and concours-standard cars has produced a depth of knowledge about what dry ice cleaning can achieve, and how to use it correctly, that simply cannot be replicated quickly.

When Paul uses dry ice on your car, it’s being done by the person who has been doing it longer than almost anyone in the country.

Where dry ice cleaning is used

Every application assessed individually.

    1. Dry ice blasting into the engine bay of a red Ferrari

      I

      Engine Bays

      The most common application. Decades of oil, grease and grime removed without water touching a single sensor or electrical connector. Results that pressure washing can never safely achieve.

    2. Vapour rolling off a red Ferrari as dry ice is blasted under its engine cover

      II

      Underbody & Arches

      Road tar, underseal, corrosion deposits and compacted grime blasted from suspension components, sills and wheel arches. Surfaces prepared for coating or inspection without compromise.

    3. Dry ice pellets poured into the blasting machine

      III

      Interiors

      Deep cleaning of door shuts, hinges, seals and interior panels. Removes ingrained dirt from areas that are impossible to reach with conventional cleaning methods.

    4. Dry ice cleaning under the raised engine cover of a red Ferrari

      IV

      Restoration Work

      Removing old underseal, paint preparation, stripping contamination from restoration projects where chemical methods are inappropriate or damaging. Bespoke to every car and every requirement.

    Dry ice cleaning, by the hour

    £200+VAT

    Per hour. Minimum of 2 hours.

    Book a Consultation

    Google Reviews

    What clients say about Paul.

    5.0

    Google rating · 139 reviews

    • “I was thunderstruck by the effect Paul achieved. I am certain the car never looked, or felt, this good, not even the day it came out of the showroom. The depth of the shine has to be seen to be believed. I consider myself very fortunate to have discovered Paul.”
      G Verified customerGoogle review
    • “Paul did an awesome job on my TT and my Q7. The Q7 needed a lot of work and now looks like new. Really worthwhile investment in upgrading and protecting both cars.”
      DW Duncan WalkerAudi TT & Q7
    • “I had my Mercedes paint corrected and ceramic coated and was blown away with how good the work is. The car looks better than brand new. I’ve seen other detailers’ work and they don’t come anywhere close.”
      AH Anjela HitchcockMercedes
    • “Completely blown away by the level of detail and care put into bringing my car back to better than new finish. Paul communicated with video and photos during the whole process. This guy is at the top of his game: he truly knows his craft and has made it an art form.”
      G Verified customerGoogle review
    • “I brought my 12 year old Audi TT to Paul in a sorry state. A week later the transformation was truly miraculous. A deep shine has been restored and the paintwork has a mirror-like finish. He makes the impossible seem possible.”
      WS William SandefordAudi TT
    • “Paul Dalton has been the best known car detailer in this country for many, many years. I was somewhat honoured to partner with him on so many cars of all shapes, sizes and prices. Great guy and still the first call for detailing expertise.”
      S SteveIndustry professional

    Book a Consultation

    Clean what nothing else can reach.

    Every dry ice cleaning job is assessed individually. Paul will tell you what’s achievable, what the process involves and what the result will look like, before any work begins.

    Paul Dalton

    Prefer something quicker? Call Paul.

    +44 7444 869983

    Your car

    The work
    What would you like done? *

    Photos help Paul see the paint before he calls. You can also send them on WhatsApp.

    Your details

    So Paul can call or WhatsApp you back.

    Best way to reach you

    A request, not a booking. No deposit, no call centre. Paul replies himself.